Technika LCD26-920 Flat Panel Television User Manual


 
English - 26 -
Install Menu
Program
Press “ or “ button to select Program. Use
or “ ” button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Band
Band can be selected either C or S. Press or “
button to set Band.
Channel
Channel can be changed by or button or
numeric buttons.
Colour System
Press or button to select Colour System. Use
or button to change the colour system to PAL,
PAL 60, SECAM or AUTO.
Sound System
Press or button to select Sound System.
Press “ ” or “ ” button to change the sound system
to BG,DK, I, L or L.
Fine Tune
Press or “ button to select Fine Tune. Press
or “ button to adjust the tuning.
Search
Press or button to select Search. Use
or “ ” button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press or button to select Store. Press
or OK button to store the settings.Stored... will be
displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Colour System
Press or button to select Colour System . Use
or button to change the colour system to PAL,
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press or button to select Store Program .
Press or OK button to store the settings.
Stored... will be displayed on the screen.
Program Table
Select Program Table by pressing or
button.
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
[GB]_MB35_COST_26857WS_1810UK_PANEUIDTV_SILVER1_TECHNIKA_10064934_50155702.indd 26 02.10.2009 09:31:52