TechniSat HD-VISION 40 PVR Flat Panel Television User Manual


 
Put something soft under the device, in order to protect the front and the LCD panel
against damages and scratches.
> Loosen and remove the two marked screws.
> Now remove the pedestal carefully in the direction of the lower side of the device.
You require an additional special profile, in order to be able to use the loudspeakers, if they are
situated at the bottom of the device when mounting on a wall. You can purchase this additional
profile from your specialised dealer under the following designation and article number.
HD-Vision 32: HD-Mount Adapter 32" Art no. 0001/3240
HD-Vision 40: HD-Mount Adapter 40" Art no. 0002/3240
3.9 Detachable loudspeakers
Your device is equipped with detachable loudspeakers. You can remove these, if:
- You would like to position the loudspeakers separately on a loudspeaker stand. (only
possible for the 32” models with side loudspeakers).
- You would like to mount the loudspeakers on the additional profile when mounting the
TV on the wall (see section 3.8.1. (only possible for models with the loudspeakers at the
bottom).
- You would like to connect the device to a HIFI or surround system (see section 4.6) and
do not want to use the supplied loudspeakers.
3.9.1 Removing the loudspeakers
> Remove the loudspeaker cables from the connection terminals. Press the spring contact
down and remove the cables.
> Now loosen the fastening screws of the loudspeaker(s) with a suitable screwdriver and
remove them.
11
EN
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 11