TechniSat HD-VISION 40 PVR Flat Panel Television User Manual


 
> Press the OK key to store the selected programme in the timer.
Date
> Select the date field with the arrow keys.
> Enter the date on which you would like to record the programme by means of the
numeric keyboard.
Start
> Select the start field with the right arrow key.
> Use the numerical keypad to enter the timer start time in this line.
Stop
> Repeat the steps as described in “Start”, to enter the stop time.
Events are also considered, if the stop time of a timer is equivalent to the beginning time
of a following timer!
Repetition (optional)
> Select the repetition field with the arrow keys.
> Press the OK key.
A selection window is now displayed with the various repetition options.
1x Timer on once.
T Daily repetition.
W Weekly repetition.
1 W Repetition during the following week.
2 W Repetition during the following 2 weeks.
3 W Repetition during the following 3 weeks.
4 W Repetition during the following 4 weeks.
1-5 Repetition only on workdays.
6-7 Repetition only on the weekend
5-7 Repetition on weekends starting on Friday.
> Use the up/down arrow keys to select the required function.
> Press the OK key to accept the settings.
Timer type
> Select the timer type field with the arrow keys.
> Pressing the OK key opens a window to select the timer type.
> Select the required timer type (see section 7.1.2) with the up/down arrow keys
and acknowledge with OK.
Storing data in the memory
> Press the green Accept control key to save the data in the memory after you have
completed programming. If you have selected a blocked programme as described in
section
8.3, you must first enter the PIN code before the data can be saved in the
memory.
Note!!!
Ensure that the device has also stored the time. Should this not be the case, leave your set e.g.
tuned to ZDF for approx. 30 seconds, so that the time can be imported.
33
EN
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 33