Filter
Top Products
The timer can be programmed as follows:
Date
> Use the arrow keys to mark the Date column
> Use the numeric key pad to enter the date on which you wish to record a pro-
gramme
Start
> Use the right arrow key to mark the Start column.
> Use the numeric key pad to enter the starting time for the timer.
Stop
> Repeat the steps shown under "Start" to enter the time when the timer should stop,
i.e. be switched off.
In order to ensure a smooth operation, there should be a gap of at least one minute
between the end of one timer period and the start of the next timer period!
Switching Timer on - Repeat
> Use the right arrow key to mark the column Rpt.
> If required, switch the timer on by pressing the OK key (Display 1x)
> By repeatedly pressing the OK key you can set the timer for further days as follows:
Display:
- Timer off
1x Timer on
D Daily repeat
1W Repeat once per week
2W Repeat every two weeks
3W Repeat every 3 weeks
4W Repeat every 4 weeks
1-5 Repeat only on workdays
6-7 Repeat only on weekends
27
bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 27