Filter
Top Products
- 13 -
ENGLISH
Press briefly to move to the Name line.
Press briefly. The first dash flashes.
Hold down (PROG +) : the characters are
displayed in ascending order.
Hold down (PROG
—
): the characters are displayed in descending order.
When the character you are looking for is displayed, move on to the next ( + ), or
preceding dash (
—
).
To insert a space, use the empty character (between ß and A).
5. CHANNEL NAME
MENU
FUNC. VT
PROG.
PROG.
FUNC. VTSTOP
TV
Press briefly to select the Memo line.
Press briefly. The + turns to OK. The channel is
stored in memory. One second later, the
line is selected again.
Search for and store all channels for the same standard. Start again for a different
standard from SELECTING THE BROADCASTING STANDARD.
Press briefly to remove the menu from the screen.
6. STORING IN MEMORY
MENU
FUNC. VT
FUNC. VT
CH X X
CC
Program. No. : X X
Memo
PROGRAM.
Name :
— — — —
CH X X
CC
Program. No. : X X
Name :
—
—
—
—
Memo
—
+
/
PROGRAM.
Press briefly to select the Program. No. line.
Enter an unused programme number
using the remote control.
If you have a decoder to receive a scrambled channel, the TV set goes into AV when this
channel is being received.
In this case, disconnect the SCART socket from your decoder and call up the
PROGRAM. menu. Select the line (Fine Tuning), reconnect the SCART socket
and adjust the fine tuning if necessary.
4. PROGRAMME NUMBER
—
+
/
CH X X
CC
Program. No. : X X
Name :
—
—
—
—
Memo
PROGRAM.
MENU
You can prevent the use of your television set without the remote control.
The TV set is child locked :
- After the sleep timer function.
- After switching off the TV set by holding down the Stand-By button on the remote
control for more than 4 seconds.
The CHILD LOCK function is indicated by the flashing of the Stand-By light. The television
can only be switched back on using the remote control which cancels the child lock.
CHILD LOCK
TH - 14 MG 76 C GB 24/10/97 15:43 Page 13