Filter
Top Products
Press the green key.
The PICTURE menu is displayed :
PICTURE is selected.
If this is not the case, select the Contents line using the
green key and Picture with the key.
Select the Brightness line (green key).
Adjust the brightness.
Repeat the same procedure to select and adjust the Colour,
and Contrast.
The TINT line only appears if the source is
NTSC from an AV1, AV2 or
AV3 audio-visual programme.
Select the Digital Mastering line (green key).
Select the option required.
When changing channels, Digital Mastering automatically
returns to On.
*The quality of an image is judged not only by the
correctness of contrast, light, and colour, but also by
its sweep frequency, i. e. the number of times per
second it is displayed on the screen. The higher the
frequency, the stabler the image and the less
flickering effect is present.
This function is used to vary the contrast of the television accor-
ding to ambient lighting.
Select the Light Sensor line (green key).
Press briefly to make selection : Off : function not active
On : function active
television set
picture adjustments
10
PICTURE
TELEFUNKEN
Brightness
Colour
Contrast
Digital Mastering Off On
Light Sensor Off On
Tint
PICTURE PIP FORMAT
TELEFUNKEN
Brightness
Color
Contrast
Digital Mastering Off On
Light Sensor Off On
PICTURE PIP FORMAT
TELEFUNKEN
Brightness
Colour
Contrast
Digital Mastering Off On
Light Sensor Off On
Digital Mastering
Light Sensor
PICTURE PIP FORMAT
TELEFUNKEN
Brightness
Colour
Contrast
Digital Mastering Off On
Light Sensor Off On
PICTURE PIP FORMAT
TELEFUNKEN
Brightness
Colour
Contrast
Digital Mastering Off On
Light Sensor Off On
B
You may adjust the picture
settings at any times.
B
B
B
B