Filter
Top Products
15
Adjusting the sound
SOUND
Return
Preset
Standard…
Treble
Bass
Balance
------|-----------
------|-----------
------|-----------
Sound type
Stereo…
Auto. volume leveling
o
Internal speakers
˛
Display the OVERVIEW menu by pressing the
MENU button.
Select the Sound option and press OK to confirm.
The SOUND menu appears with the following
options:
Return : go back to OVERVIEW menu
Preset : use the or ÿ button to select the appropriate setting (Standard, Film, Voice, Music and Personal)
for the programme you are watching.
Personal option contains the values you have defined for Equalizer settings.
Treble , Bass: select each option in turn and make the necessary adjustments using the / ÿ buttons.
These settings are automatically stored under Personal in the Preset option.
Balance: use the or ÿ button to balance the sound between the right and left speakers.
Sound type: this option is used to select the appropriate sound type.
The available options depend on the programme you are watching.
The table at the bottom of this page indicates the sound types available for each type of broadcast.
Auto. volume leveling:. Tick the box using OK button if you want to keep the same sound level on all the
channels.
Internal Speakers: the TV set’s speakers are enabled by default - the box is checked.
You can connect amplified speakers or an amplifier to the TV LCD (see the “Other information” chapter).You
can then get the most out of the sound using all the speakers or you can disable the internal speakers.
Uncheck the box to do this, by pressing OK to confirm.
Note : If you do not connect amplified speakers or an amplifier to the TV LCD do not tick the box. Otherwise there will
be no sound.
Press EXIT to close the menu.
Broadcast
Options
Mono
Automatic, Mono
Nicam mono
Nicam, Mono
Nicam / IRT stereo
Stereo, Mono
Bilingual Nicam
Sound 1, Sound 2, Sound 3
Bilingual IRT
Sound 1, Sound 2
AV
Stereo, Sound 1, Sound 2