Technicolor - Thomson AV2 Flat Panel Television User Manual


 
5
Do not handle the power cord plug with wet hands.
l Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power
cable, hold the plug, not the cable.
l Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or
forcefully pull the power cable. Doing so may cause damage to the power cable, which can cause fire or
electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center
If the LCD TV is not in use for a long period of time, unplug the power cord from the wall
outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is
detected from the LCD TV, unplug the power cord immediately.
l Continuous use of the Display under these conditions might cause fire or permanent damage to the unit.
Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized
personnel are strongly discouraged due to its dangerous high voltage nature.
If water or foreign objects get inside the TV, if the TV is dropped, or if the cabinet
becomes damaged, disconnect the power cord plug immediately.
l A short-circuit may occur, which could cause fire. Contact an Authorized Service Center for any repairs
that need to be made.
IV CAUTION
When using the LCD TV
To turn off the main power, be sure to remove the plug from power outlet. The power outlet socket should
be installed as near to the equipment as possible, and should be easily accessible.
Be sure to disconnect all cables before moving the LCD TV.
l Moving the Display with its cables attached might damage the cables, which, in turn, can cause fire or
electric shock.
l
Disconnect the power plug from the wall outlet as a safety precaution before carrying
out any cleaning.
Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
l Built-up dust on the power cord plug can increase humidity, which might damage the insulation and cause
fire.
Unplug the cord from the wall outlet and clean it with a dry cloth.
l Do not insert any objects or liquids into the unit.
l Do not expose the unit to water or moisture, or otherwise to the elements
l Do not open the unit for any reason. Doing so will void the warranty!
l Unplug the unit if it will not be used for an extended period of time
l Avoid placing the unit near sources of heat
l Avoid placing the unit in direct sunlight
l In any event, if any problems arise, contact your dealer immediately!