Filter
Top Products
Connections and Setup
9
EN
1. Switch the television set on.Select the AV channel on
the television set.
2. Press the STANDBY/ON button on the remote
control to turn the appliance on.
3. Press ENTER.Choose a language using the or
button on the remote control,then confirm by
pressing
ENTER.
4. The EU Tuner option is selected. Select your country
using the or button on the remote control:UK,
Eastern Europe,Western Europe or France.
5. The Set Clock option is selected.Select a field using
the and buttons and set the time and then the
date using the and buttons or the number
buttons.Press the button to select Done,and
then press
ENTER.
6. The automatic channel search starts.
Note:Select Cancel and press ENTER to interrupt the
automatic channel search process.
7. When the automatic channel search is completed,
press
ENTER to leave the automatic tuning process.
The automatic channel set-up assigns the numbers to
the channels in a predefined order.These numbers
may therefore not match the actual channel numbers.
Should this be the case,change these numbers by
carrying out the instructions below (see "Sorting the
channels").
Sorting the channels
1.
Press the SETUP button.Select the TV Tuner
option using the and buttons and press or
ENTER.
2. Select the Channel List option using the and
buttons and press or
ENTER to reveal the
television channel name list.
3. Select a channel name using the and buttons
and press
ENTER.
4. Select the Edit Name option and press ENTER.
Select From List and press
ENTER to choose a
channel name from a channel list using and .
Select Keyboard to enter a channel name:use the ,
, and buttons to select a letter or a number
and press
ENTER.When you are finished,select
Done and press
ENTER.
Eas
y
Setu
p
Please select favored language for
Menu Language.
Set Clock
EU Tuner
Auto Scan
Finished
Language
Welcome
English
French
German
Italian
Tuning in TV channels
Channel List
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Position Channel Enable/Disable
Press ENTER to disable.
Enabled
Edit Name
Move to
Enable / Disable
EXIT
DPL953REC_EN 17/11/05 8:58 Page 9