Filter
Top Products
Menus
29
EN
EN
PAL or NTSC TV sets
If the picture on the DVD being played appear in black and white on your TV screen,the standard
of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to
NTSC or vice versa.
Select PAL/NTSC then with the
OK key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Scart output
See the paragraph below on Progressive Scan.
Front Display menu
Depending on the brightness of the room where you’ve installed your player, select one of the 4
settings to adapt the brightness of the display panel to suit its environment.
1. If a disc is being played,press STOP (the player menu appears).
2. Press to highlight Display and press OK (The Display menu appears giving a choice of
options).
3. Press to highlight Front Display and press OK (The Front Display menu appears giving
a choice of options).
4. Use keys or to highlight one of the four available options and press OK to validate
your choice.
• Always Bright,
• Always Dim.
• Dim for Movies (dimmed lighting during replay of a disc),
• Off for Movies (no display during replay of a disc),
5. To return to the player menu, press until the menu is displayed on the screen.
Progressive Scan
To display images on a TV, or monitor (plasma, LCD...) equipped with a Progressive Scan
function, you must start this function on your player after having connected your TV to the 3
COMPONENT connectors (Y, Pr, Pb) of your player.
1. If a disc is being played,press STOP (the player menu appears).
2. Press to highlight Display and press OK (The Display menu appears giving a choice of
options).
3. Press the key to highlight Scart output and press the OK key.
4. Use the or keys to highlight YUV and press the OK key to confirm your selection.
Note: the terms YUV, COMPONENTE (COMPONENT), and Y, Pr, Pb all designate the same
function.The designation is different according to the context (video signal, type of video output,connector
names).
5. Return to the Display menu by pressing the key once.
6. Use the or keys to highlight Progressive Scan and press the OK key to confirm
your selection.
7. To return to the player menu, press the key until the menu is displayed on the screen.
2_DTH720_en 22/06/04 11:26 Page 29