Filter
Top Products
2-22 User's Guide LDK 4502 - HDTV Camera Base Station Installation
MCP Available
When no MCP is available it might occur that some
functions are in an undesirable position, for example, a lock
on the upper part of the OCP. To prevent this happening,
set the Base Station menu item
System \ MCP Available
to
No when an MCP is not available.
The functions affected by this setting and their state are as
follows (if the item value is set to MCP Available = No):
Variable black stretch (Yes/No) Yes
Variable gamma (Yes/No) Yes
Variable Flare (Yes/No) Yes
Saturation (Yes/No) Yes
White clipper (Yes/No) Yes
Knee slope (Yes/No) Yes
Knee point (Yes/No) Yes
Iris(Normal/Reverse) Normal
OCP lock (Upper/Total) Total
Intercom (System/Isolate) System
Audio (External/MCP) External
Aspect Ratio (External/MCP) External
Aspect Ratio (4:3/16:9) 4:3
Autolight (Yes/No) Yes