Technicolor - Thomson IB5000 DVD Player User Manual


 
10
Video and Audio connections
With a S-Video or Video(cinch) connection, (Not required when using the SCART
connection). Select on your TV set the correct AV input and set the TV screen aspect : 4x3 or
16x9 (see your TV user's manual).
If the SCART socket (with S-Video or RGB) is not free.
Connect your DVD player using a special S-Video cable (not provided) for the video connection
and a Cinch cable for audio left and right inputs (provided).
Note: Always connect your DVD player to the other set (tv, AV Amplifier, ...) with only one
video cable - either SCART, S-Video or Video (Cinch).
Remove the protection cap from the DVD socket and connect the
optical audio digital cable firmly as shown.
Keep the protection cap and always reattach the cap when the
connector is not in use, to keep it dustfree.
TV
Video Inputs
DVD
Audio System or TV
Audio Inputs
Good
picture
Hosiden socket
Better picture
(S-Video connection
page 11)
SCARTsocket
Best picture
(if RGB is selected in
SET UPMENU) (p. 11)
* in grey : not provided
PCM/BITSTREAM
S-Video
Video
Input
Audio
Inputs
Digital Audio
Input
Scart Input
S-Video
Cable *
Scart
Cable*
AV
Cable
AV
Cable
Coaxial
Cable*
Optical
Cable *
OROR OR
Please use an RGB capable
SCART cable (all 21 pins
connected).
The VIDEO OUTSELECT
button at the rear of the device
permits the S-Video signal to
be sent to the Scart connector
or the Hosiden connector. If
SCART is selected, the S-
Video signal will not be
available at the Hosiden
connector. If S-VIDEO is
selected, the S-Video signal
will not be available on the
Scart connector.
IB5000_5200GB 4/09/01 10:11 Page 10