Filter
Top Products
7
Channel set-up
EN
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
Display the
OVERVIEW menu by pressing the MENU button. Select the Installation
option and press OK to confirm. Select the Manual installation option from the
Installation menu and press OK to confirm.
1. Select the Standard option. Use the buttons to select the standard for your
country.
Note:The following standards are available to choose from: I for the UK and Ireland, France
for France and Luxembourg, DKK’ for Eastern Europe, the Middle East and Asia, EURO
BG
for Western Europe, Australia for Australia, and New Zealand for New Zealand.
2. Select the Reception option. Select the reception method for the channels (aerial or
cable network) using the buttons.
3. Select the Channel search option. Enter the number of the reception channel or
use the buttons to find the channels.When a channel has been found the picture
is displayed.
4. If the picture is not clear you can adjust the setting.You do this by selecting the Fine
tuning option and adjusting it with the buttons.
5. Select the Channel name option and choose a name from the list using the
buttons. If none of the names available is suitable select
CH____. Use the
buttons to select a character from the list made up of the letters in the standard
alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the buttons to
go to another character. Press
OK to confirm.
6. If the channel is encoded and you want to connect a decoder to the AV1 socket, select
the
Decoder option and check the box by pressing OK.
7. Then select the Teletext char. set option and choose the character set that will be
used for Teletext on this channel using the buttons.The following character sets
are available:
1:Western Europe, Greek 4:Arabic
2: Eastern Europe 5: Ukrainian
3: Russian, Belarussian
8. Then select the Store on number option and enter the number to be assigned to
this channel using the numeric buttons (for instance, for BBC1 type 01). Press
OK.
Important:Whenever you change a value in the Manual Installation menu, the Store
on number
option starts flashing.To confirm your change you need to select the Store on
number
option and press OK. If you do not confirm the change it will be cancelled when you
change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
- For cable networks, to search for missing channels, select
Other instead of a country, then
select
Automatic update in the Automatic installation menu.
- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the
VOL ➛ button on the television and the MENU button on the remote control
until the menu displays. Proceed as for the initial set-up.
- Subsequent set-ups:
- The
Automatic update function allows you to set up channels just launched or any
channels that are missing or wrongly set up.
- The
Automatic search function is used for setting up channels after the initial set-up
(e.g. after moving house).This process deletes all channels previously stored.To set up a new
channel, it is better to use
Automatic update or Manual Installation.
Manual Installation
Return
Standard
❿❿
I...
Reception Aerial...
Channel search CH 10
Fine tuning
Store on number 01
Channel name BBC1
Decoder
Teletext char. set 1...
Choose you standard, then select reception.
IFC130-L_EN-2 8/12/05 15:22 Page 7