Filter
Top Products
Advanced functions
EN
13
Graphic equaliser
Select Graphic equaliser from the Sound menu and press OK to display the menu.
This menu is used to select a preset parameter and define your own settings using the
graphic equaliser. It offers the following options:
Sound preset: use the buttons to select the appropriate setting for the
programme you are watching.
The
Personal setting stores your graphic equaliser settings.
Your selection is applied to all channels and AV programmes.
Frequency range: the graphic equaliser has seven frequency bands. Select each band in
turn using the buttons and make the necessary adjustments using the buttons.
Press
OK to confirm.
Note:When you are setting the graphic equaliser, Personal appears under the Sound
preset
option.
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
Adjusting the picture
The menus for adjusting the picture are used to obtain the best picture setting according to
your preference, the type of programme you are watching and the ambient lighting.When
you make an adjustment only the selected option remains displayed, allowing you to see the
changes taking place on screen. The entire menu is displayed again when you select another
option or the time for making an adjustment has elapsed.
Display the
OVERVIEW menu using the MENU button. Select Picture and press OK to
confirm.The
Picture menu appears with the following options:
Other settings: this option provides access to the Other settings menu (see further
below).
Picture preset: use the buttons to select the appropriate setting for the
programme you are watching.
Personal contains the values you have defined for the settings Brightness, Colour,
Contrast, Contrast expand, Sharpness., Auto noise reduction, Tone, and
Tint.
You can select a preset parameter for each AV programme.
Brightness, Colour, Contrast, Sharpness: adjust these settings as required using
the buttons.
Note:These settings are automatically stored under Personal under the Picture preset
option.
Tone: adjusts the colour temperature. Select an option from the list using the
buttons.
Tint: is used to adjust the picture’s tint. Make the necessary adjustments using the
buttons.
Note:This function is only available for NTSC audio-visual sources.
Lamp & Position: this option provides access to the Lamp & Position menu (see
further below).
Some menu options are not available in PIP
Split screen mode (see opposite).
Press
EXIT to close the menu.To return to the OVERVIEW menu, select Return and
press
OK to confirm.
Return
Sound preset Film...
❿❿
Frequency range Treble (12 kHz)...
Equaliser
Return
Other settings ...
Picture preset Personal...
Brightness
Colour
Contrast
Sharpness
Tone Neutral...
❿❿
Tint
Lamp & Position ...
Picture
Return
❿❿
Brightness
Colour
Contrast
Tone Warm...
Picture
itc251-en 2/02/06 11:42 Page 13