Filter
Top Products
Advanced functions
EN
14
Other settings
Select the Other settings option from the Picture menu and press OK to display the
menu.The options are the following:
Contrast expand: can be used to adjust the picture according to the ambient
brightness. Select an option from the list using the buttons.
Automatic format: automatically applies the appropriate format to the picture. Check
this box by pressing
OK to enable this function.
Auto noise reduction: improves the quality of the picture in the case of poor
reception. Select an option from the list using the buttons.
Auto skin tone: improves skin tone rendering. Check the box to enable this function by
pressing
OK.
Note:This function is only available for NTSC audio-visual sources.
Film mode: detects that the programme being broadcast is a film and enhances picture
quality. Select an option from the list using the buttons.
PC Mode: If you connect a PC to your TV set, using either the VGA, HDMI or
component sockets, you can select the
PC option from the list using the buttons. In
PC mode, the TV set reduces the PC image so that you can see the whole image.
Notes:
- The
Video option is selected by default..
- This function is only available for the VGA, HDMI and COMP AV sources.
Press EXIT to close the menu.To return to the Picture menu, select Return and press
OK to confirm.
Lamp & Position
Select the Lamp & Position option from the Picture menu and press OK to display
the menu.The options are the following:
Lamp brightness: this function is used to adjust the lamp brightness. Select an option
from the list using the buttons.
Note:The Boosted option increases brightness but reduces lamp life.
The help text also indicates the relevant lamp type for your set.
Write down here the lamp type for future reference:
Horizontal position: use the buttons to move the picture horizontally on the
screen.
Vertical position: use the buttons to move the picture vertically on the screen.
Note:You can adjust the vertical and horizontal positions for each source.
Press EXIT to close the menu.To return to the Picture menu, select Return and press
OK to confirm.
Return
Contrast expand Medium...
Automatic format
Auto noise reduction Low...
Auto skin tone
Film mode Advanced...
PC Mode Video...
Other settings
Return
Lamp brightness Normal...
Horizontal position
❿❿
Vertical position
Lamp & Position
To adjust the vertical position of the picture,
press
➛➛
or
❿❿
.
itc251-en 2/02/06 11:42 Page 14