Filter
Top Products
Advanced functions
EN
18
Configuring AV sockets
You can configure your TV set according to the equipment you connect to it.
Display the
OVERVIEW menu using the MENU button. Select the Installation option
and press
OK to confirm.The Install menu appears. Select the AV settings option and
press
OK to confirm.
Follow the messages on screen and the instructions below explaining how to configure the
AV sockets.
AV1 name: Use the buttons to select from the list the name of the equipment
connected to this socket. If the factory preset names do not suit you, select
AV1__ and
enter another one, following the screen messages.
AV1 video input: use the buttons to select from the list the type of video signal
transmitted by the equipment connected to the AV1 socket.
Note: Select RGB if no picture is displayed when you connect a games console.
Repeat the above procedure to configure the AV2 and AV3 sockets.
COMP name: Use the buttons to select from the list the name of the equipment
connected to the COMP sockets. If the factory preset names do not suit you, select
COMP _ _ and enter another one, following the screen messages.
VGA name: Use the buttons to select from the list the name of the equipment
connected to this socket. If the factory preset names do not suit you, select
VGA _ _ _
and enter another one, following the screen messages.
Note:This option is only displayed if your TV set has a VGA socket.
HDMI name: Use the buttons to select from the list the name of the equipment
connected to this socket. If the factory preset names do not suit you, select
HDMI _ _
and enter another one, following the screen messages.
Press
EXIT to close the menu. Select the option Return and press OK to return to the
Install menu.
Return
❿❿
AV1 name DECOD.
AV1 video input RGB...
AV2 name VCR1
AV2 video input S-Video...
AV3 name CAMCOR
AV3 video input Video...
COMP name DVD...
HDMI name DVI...
AV settings
Select the name of the device
connected to AV1.
itc251-en 2/02/06 11:42 Page 18