Filter
Top Products
Getting Started
Daylight-Saving Time
This unit is a preset Clock: the clock is already preset to Eastern Standard Time. It’s simple to match settings to where you
live. For daylight saving time:
1. Set the DST Switch to +1. The DST icon will appear on top of display and the time will advance 1 hour.
2. Set the DST Switch to -1 to set the time back 1 hour.
Pre-Set Time and Date Settings
This model is equipped with a preset feature; the time and date have been set for Eastern Standard Time at the factory.
1.
To change your time zone setting, press and hold the Time Zone Button. The current time zone will flash briefly at the
bottom of the display.
2.
While the Time Zone is flashing, press the
<< or
>> Button to select your time zone. The time display will show the
current time for the selected time zone. There are seven zones to choose from:
ATL
Atlantic Standard Time
EAS
Eastern Standard Time
CEN
Central Standard Time
MTN
Mountain Standard Time
PAC
Pacific Standard Time
ALS
Alaskan Standard Time
HAI
Hawaiian Standard Time
Setting Time and Calendar
1. Press and hold the Clock Adjust Button located on the back of the unit for 2 seconds until the time display flashes. If
the time is correct, press the Clock Adjust Button again to accept the setting. Otherwise, press the << or >> Button
to adjust the time (hold for a few seconds to advance or reverse rapidly). Remember to set the correct AM or PM time.
(An icon at the upper right hand corner of the display is the PM Indicator; there is no AM indicator). When the correct
time is displayed, press the Clock Adjust button to confirm. The year display will flash.
2. Press the Clock Adjust Button to accept the current year setting or press the <<
or >> Button until the correct year
is displayed. Press the Clock Adjust Button to confirm year setting after adjustment.
3. The display will change to show the date flashing. Press the Clock Adjust Button to accept the current date setting
or press the <<
or >> Button until the correct date is displayed (holding the button for a few seconds will advance or
reverse rapidly). Press the Clock Adjust Button to confirm the date setting after adjustment. You will hear 2 beeps
indicating that clock and calendar setting is complete and it will exit the setting mode.