Filter
Top Products
6
Color Change
1. During normal mode, press and hold the Color Button on top of the unit to activate the random color sequence (the
color of the cabinet and display backlight will fade from one color into the next). There are seven colors. To stop on a
particular color, press the Color Button when the desired color is displayed.
2. You can control the brightness by pressing the Snooze/Dimmer Button as needed.
Note: The T205 has a dual alarm feature allowing you to wake to Nature Sounds or Radio. A buzzer alarm will still sound in
the event of power failure (if backup batteries are installed).
Setting the Alarm(s)
1. Press and hold the Button until the display flashes. Press the << and >> Button to set the alarm time. Remember to
set the correct AM or PM time.
2. Press the Button again or wait for 10 seconds. Alarm 1 is now armed, indicated by the numbered alarm clock icon.
3. To set Alarm 2, just repeat steps 1 and 2 above but using Button.
4. Set the Function Switch located on the back of the unit to wake to AM/FM radio or Nature Sounds. Both alarms (1 and
2) will wake you to the same sound source.
NOTE: The radio alarm will wake you to the currently tuned band and station.
Review, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Press the (or ) Button once. The display will show the current alarm time on the bottom part of the display for alarm
time review.
2. During alarm review, press the button again to arm or disarm the alarm. When the alarm is armed, the related alarm icon
appears in the display.
Resetting the Alarm to Come on the Next Day
1. When the alarm is sounding, press the Button to silence the alarm and reset it to come on the following day.
Snooze
1. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again about 9
minutes later. Snooze can be pressed several times during the 1 hour alarm cycle.
Operating the Dual Alarm System