Filter
Top Products
42 Recording and Playing
To stop recording, press the
button; then a box like
the left figure appears, which
shows programmes currently
being recorded. If you select
one, its recording will stop.
While a recording is going on,
you can watch or record another
service.
To additionally record another service, switch to the service
you want to record, and press the button.
Once a recording is started, it is put on the recorded pro-
gramme list even though it is not finished yet. The recording
file is named after its service name with a suffix of a num-
ber. To view the recorded programme list, press the but-
ton. See § 7.2 for detailed description about the recorded pro-
gramme list.
7.1.2 Timer recording
You can make a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch
into operation mode and start recording at the specified time.
When the recording comes to the end, the digital receiver will
switch into standby mode again in one minute. However, if
you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
into standby mode.