Filter
Top Products
55
If you have a USB storage, you can update the firmware from
it. To update the firmware from your USB storage, perform
the following steps:
1. Download a new firmware from the Topfield web site.
2. Copy the firmware file to your USB memory.
3. Insert the USB memory into the USB port on back panel
of the digital receiver.
4. Select the Installation > Transfer Firmware > Update
from USB menu, then the files in the USB storage are
listed.
5. Place the highlight bar on the right firmware file and
press the
✄
✂
✁
OK button, then a countdown will be dis-
played on the front display of the digital receiver.
6. When ‘END’ message appears, restart the digital re-
ceiver.
NOTE
Your USB storage must be formatted in the FAT file system. If
not, the digital receiver cannot recognize your USB storage. In
addition, the digital receiver can only recognize files and di-
rectories which are named with only alphabetic, numeric and
underscore letters. If there is a file or forlder named with other
letters, the digital receiver cannot recognize not only itbut also
the subsequent files and folders.