Filter
Top Products
30 Service Search
1.
Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Auto.
3.
If you set the Network Search option to On, the digital
receiver will check up the up-to-date channelinformation
as searching services, but it takes rather longer time.
Searching every service of a transponder
To search every service of a transponder, perform the following
steps:
1.
Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Manual.
3.
Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
4.
Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desired transponder.
6.
If you set the Network Search option to On, the digital
receiver will check up the up-to-date channelinformation
as searching services, but it takes rather longer time.
NOTE
You may get transponder information from a satellite magazine
or web site such as
http://www.satcodx.com
or
http://www.
lyngsat.com.
Searching one service of a transponder
To search one service of a transponder, perform the following
steps: