Filter
Top Products
52 Recording and Playing
7. Select the Save command, then the block is stored. The
stored file will named after its source file with a suffix of
‘CUT’ and a number
In addition, you can copy a recording file in whole or in part
when playing back it.
1. Start playback of a recording file you want.
2. Find a desired position from which a copy will be started
with button or button.
3. Press button.
4. Pressing button stops copying. The copied file will
be named after its source file with a suffix of ‘COPY’ and
a number.
Circle
Once a copy is started, a copying symbol like the
next figure will be displayed on the right top of the
screen for a few seconds. To see copying status, press
button. The outer circle of the copying symbol indicates
progress rate.
NOTE If copying time is less than about 1 minute, the copy-
ing will not be done successfully. It is recommended
not to change the playback speed.
7.5 Playing a MP3
To play a MP3 file with the digital receiver, you have to trans-
fer your MP3 files to the digital receiver from your personal
computer. For how to transfer your MP3 files to the digital
receiver, refer to § 10.3 or Chapter 9.
To play a MP3 file, perform the following steps:
1. Press button, and then press button or
button to display the MP3 file list.