Filter
Top Products
60 Accessing to The Digital Receiver
9.2.1 WLAN status
A service set identifier (SSID)
is a sequence of characters that
uniquely names a wireless local
area network. SSID shows the
network accessed by the digital
receiver at the present.
There are two modes for Network type. One is infrastructure
mode and the other is ad-hoc mode. Infrastucture mode al-
lows a wirelss LAN to be integrated into an existing wired
network through an access point (AP). Ad-hocs mode is used
for a simple peer-to-peer network. This mode only allows the
sharing of local resources between wireless clients without an
AP.
TX Rate shows the transfer rate between the digital receiver
and the AP or other wireless clients.
Channel is automatically assigned to if Network Type is set to
Infratstructure.
Security shows the encryption type specified.
IP Address, Subnet Mask and Gateway show the network in-
fromation specified.
MAC Address shows the media access control address of the
digital receiver.