Filter
Top Products
54 Listing Services
To use Vega, you have to prepare a RS-232 cable to link the
digital receiver with your personal computer.
Plug one end of a RS-232 cable (9 pin D-sub
cable) into the RS-232 port on the digital
receiver, and the other end into the matching
port on your computer.
Turn off the digital receiver if it is on, and then Run Vega. To
import the channel data from the digital receier, perform the
following steps:
1. Select the Mode > Serial menu.
2. Select the Up & Down > Upload from STB menu.
3.
A box appears asking for your confirmation. Press the
Upload button on it.
4.
Turn on the digital receiver. Data transfer will start as
soon as it is turned on.
Of course, you can open a std file instead of importing the chan-
nel data from the digital receiver if you have one. When you
have finished your work, you have to perform the following
steps to export the channel data to the digital receiver.
1. Select the Up & Down > Download to STB menu.
2.
A box appears asking for your confirmation. Press the
Download button on it.
3.
Turn on the digital receiver. Data transfer will start as
soon as it is turned on.