Filter
Top Products
ENGLISH-18-
Features: Picture Size, Sleep Timer,
Panel Lock, Backlight
Selecting the picture size
You can select a desired picture size (Auto, 4:3 or
16:9) either directly on the remote control or in
the on-screen display menu.
• Using the remote control
Repeatedly press on the remote control to
select a desired picture size.
•Using the OSD menu
1. Press MENU, and then press / until the
Special menu appears.
2. Press to highlight Picture Size and press
/ to select a desired picture size.
Turning off the TV automatically (Sleep
Timer)
If the Sleep Timer is set, the TV can automatically
switch to stand-by mode at the preset time.
To set the Sleep Timer:
1. Press MENU, and then press / until the
Special menu appears.
2. Press to highlight Sleep Timer and press
/ to set the length of time before the TV
turns off.
The time length ranges from 0 minutes to
120 minutes.
0
J 15 J 30 J 45 J 60 J 120
The timer starts at the time the timer is set, and the
TV indicator will turn from blue to yellow.
To cancel the sleep timer:
Select 0 minutes for the timer.
Note: When an instant power failure occurs or
the TV is switched manually into standby, the
sleep timer settings may be cleared.
Locking the control buttons on the TV’s
side panel (Panel Lock)
You can lock the control buttons on the TV to
prevent your settings from being changed
accidentally (by children, for example). When
the Panel Lock is On, no control buttons on the TV
panel will operate except pressing to turn
into standby.
To active the panel lock function:
1. Press MENU, and then press / until the
Special menu appears.
2. Press to highlight Panel Lock and press
/ to select On.
Note: Remove the remote control for Parental
control.
Setting the Backlight
Your LCD TV set has a light behind its LCD panel.
This light source, which is called a backlight,
affects the brightness of the entire screen. In a
darkened room with proper lighting, we
recommend you lower this setting before you
begin adjusting the brightness and contrast. You
can always raise it later if it proves too dim.
To set the Backlight:
•Using the remote control
Press Backlight repeatedly to select.
• Using the on-screen display
1. Press MENU, and then press / until the
Special menu appears.
2. Press to highlight Backlight and press
/ to select Bright, Normal, or Power
Save.
Picture
Size
Special
Colour System
Auto
Panel Lock
Off
Backlight Bright
Teletext Setting >
MENU
OK EXIT
Language
English
Sleep Timer
0 Minutes
Picture Size
Auto
Item
Pressing or
Auto Automatically adjusts the image to fit
the TV screen.
4:3 This is most suitable for 4:3 images like
computer monitors, standard definition
TV and 4:3 aspect DVD movies, as it
displays them without aspect alteration.
16:9 This is most suitable for images which
are already in a 16:9 aspect, like high
definition TV, as it displays them
without aspect alteration.
20VL64-en.book Page 18 Thursday, February 1, 2007 5:06 PM