Filter
Top Products
ENGLISH-19-
Features: PC Settings, Input Selection
Using the PC settings
You can adjust the horizontal/vertical picture
position, frequency (to minimize vertical stripes
on the screen), and phase (to remove horizontal
noise and sharpen the picture) manually or auto-
configure these settings all at once.
1. Confirm a PC is connected (see
"Connecting a personal computer (PC)" on
page 12).
2. Repeatedly press on the remote control
or on the TV side panel to select PC input
mode.
3. Press MENU, and then press / until the
PC menu appears.
4. To automatically adjust the settings, press
to highlight Auto and then press OK. The
TV will automatically adjust the screen
position, frequency, and phase. Allow a
few seconds while auto-configuration is in
progress.
5. To manually make the appropriate
adjustments to other items, press to
highlight the item to be set and then press
/ to make adjustment.
•Frequency
Minimizes any vertical bars or stripes
appearing on the screen background. The
adjustable range may vary depending on
the input mode.
•Phase
Reduces (or minimizes) any horizontal noise
and clears up or sharpens the character
images. The adjustable range may vary
depending on the input mode.
• H. Position/V. Position
Adjusts picture left/right and up/down. The
adjustable range may vary depending on
the input mode.
Selecting an input signal
If you would like to view image coming from
another device connecting to your TV, repeatedly
press to select your desired input signal on
the remote control or the right side panel of the
TV.
A selection menu displays on screen after the first
button press.
Note: When an S-Video signal is input to EXT2,
EXT2-S will be automatically sensed. EXT2-S will
be displayed on the input menu instead of EXT2.
Make sure the equipment you want to view is
correctly connecting to the TV. See "Connecting
external equipment" on page 10 for details.
In addition to accepting signals from external
devices, the TV can meanwhile output signal to
other external devices via
(SCART 1) or
(SCART 2).
e.g. When you want to view an image coming
from , make sure the connector is correctly
connected to an external device and select EXT1
as the input mode. You can connect another
equipment to for recording or displaying
the image in CVBS format via a SCART lead.
To exit this menu, press EXIT or OK, or just wait for
a few seconds to let the menu disappear.
PC
Frequency
Phase
H. Position
V. Position
32
32
Auto
MENU OK EXIT
Input
selection
TV
EXT1
EXT2
EXT3
EXT3-S
PC
Selected input
mode
Using input
connector
Available output
connector(s):
Output signal
TV
: Tuner,
: Tuner
EXT1
: CVBS
EXT2/EXT2-S
: Tuner
EXT3
(Video)
: Tuner,
: Video
EXT3-S
(S-Video)
or
: Tuner,
: Tuner
PC
PC
: Tuner,
: Tuner
20VL64-en.book Page 19 Thursday, February 1, 2007 5:06 PM