Filter
Top Products
30
Chapter 5: Setting up your TV
To block channels in the channel memory:
You can block specific channels. You will not be
able to tune blocked channels unless you unlock
them.
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash ( ) on
the remote control to enter the channel number
(for example, 56–1).
If the channel is found, the number will be added
to the list.
If the channel is not found, a message will appear.
To remove encrypted channels from the
channel memory:
If an encrypted channel is accidentally added to
the channel list by programming channels, you can
remove the unwanted encrypted (non-viewable)
channel while you are channel surfing. When you
tunes to an encrypted channel, the following
message will appear.
Press while the message is on the screen to
remove the unnecessary channel from the channel
list.
Labeling channels
A list of common channel labels (logos) for
various channels (ABC, CBS, etc.) will be
programmed into the TV. You will be able to view
and assign these logos from the Channel Labeling
window. If the desired channel label is not
provided in the list, you will be able to manually
enter/edit labels using the software keyboard.
To assign channel labels:
Note: The maximum number of labels that
can be stored is 128.
To remove channel labels:
1
From the Channel Options menu, press
to move to the channel lock list.
2
Press or to select a channel position to
be locked and then press . Enter your four-
digit PIN code. A tick will appear in the box.
To remove the tick, press again.
3
To save the setting, press .
Digital Channel Is Encrypted - Press 1 on remote to remove channel
1
1
From the Preferences menu, press or
to select Channel Labeling and then press
.
The Channel Labeling window opens.
2
Press or to select the channel you want
to label.
3
Press to select the desired
channel label and then press .
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and
then press .
1
Open the Channel Labeling window.
2
Press or to select the channel for which
you want to remove the label.
3
Press to select {No Label} and
then press .
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and
then press .