Filter
Top Products
21
Basic setup
Basic setup
Auto Setup
Auto Setup
The Auto Setup function helps to install your TV/DVD easily.
It leads you the Language selection, Air/Cable selection and Automatic
channel search.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made!
POWER
EXIT/CANCEL
/ / /
ENTER
1
To turn on the TV/DVD, press POWER.
POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.
•
2
Auto Setup menu appears on the screen.
Press ▲ or ▼ to select “Language”, then
press ◀ or ▶ to select your desired language.
Automatic Search
Auto Setup
Language
Signal Type Cable
Start
English
: Adjust
: Select
3
Press ▲ or ▼ to select “Signal Type”, then
press ◀ or ▶ to select “Air” or “Cable”.
Automatic Search
Auto Setup
Language
Signal Type Cable
Start
English
: Adjust
: Select
Air - VHF/UHF channels
Cable
- Cable TV channels
4
Press ▲ or ▼ to select “Automatic Search”,
then press ENTER.
Auto Setup
Language
Signal Type Cable
Start
English
: Select
Automatic Search
ENTER:Set
5
Now the “Automatic Search” starts.
Auto Setup
Language
Signal Type Cable
Start
Digtal Channel Found :
Analog Channel Found : 0
0
English
EXIT : End
Automatic Search
If you press EXIT/CANCEL, the Automatic
Search stops and changes to the TV screen.
After the starting setup is completed, the TV
channel appears on the screen.
•
•
Note:
The Auto Setup function will work only when you
press POWER for the first time.
The process of “Automatic Search” may take 15 to
30 minutes to complete, depending on your regional
cable service.
•
•
50S0301A.indb 2150S0301A.indb 21 2/5/08 5:58:39 PM2/5/08 5:58:39 PM