Filter
Top Products
16
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
You will need:
• one S-video cable
• one pair of standard audio cables
VHS Camcorder
Note:
For better picture quality, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable.
Do not connect both a standard video cable
and an S-video cable at the same time, or the
picture performance will be unacceptable.
You will need:
• one set of standard AV cables
VIDEO
AUDIO
L
R
OUT
VIDEO
AUDIO
L
R
OUT
S-VIDEO
S-VIDEO
Side panel of
TV/DVD
S-VHS Camcorder
Rear lower left of TV/DVD
Connecting an audio system
This connection allows you to use an audio amplifier and external
speakers, and adjust the audio level using the TV/DVD’s remote
control.
To control the audio, turn on the TV/DVD and the stereo amplifier, and
turn off the TV/DVD's built-in speakers (see “Turning off the built-in
speakers” on page 44).
You will need:
• one pair of standard audio cables
Note:
To hear sound when using an external audio
amplifier, the volume of both the TV/DVD and
the amplifier must be set above 0 (zero).
For example, if the volume of the TV/DVD is
set to 0, you will not be able to hear any
sound, even if the volume of the amplifier is at
its highest level.
LINE IN
LR
Amplifier
Rear lower left of TV/DVD
Connecting
your TV/DVD
J5P00101A(E)P11-21 8/12/04, 11:24 AM16