Filter
Top Products
14
(E) 26HL84/32HL84
Connecting
your TV
VCR2
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You also can record one
channel while watching another channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
VIDEO AUDIO
LR
IN
OUT
IN from ANT OUT to TV
VIDEO AUDIO
CH 3
LR
CH 4
IN
OUT
CH 3
CH 4
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
VIDEO
AUDIO
OUT
L
R
VCR1
From
Antenna
TV
***
Note:
If you have VCRs with S-video, use S-video
cables instead of standard video cables. Do
not connect both a standard video cable and
an S-video cable to VIDEO 1 (or VIDEO 2) at
the same time, or the picture performance
will be unacceptable.
Do not connect the same VCR to the output
and input terminals on the TV at the same
time.
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1.
*
The Video OUT terminals does not output
the POP picture.
**
The Audio OUT terminals can output the
sound of either the Main or POP picture
(see “Selecting the Audio OUT sound” on
page 58).
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable. Do not connect both a standard video
cable and an S-video cable at the same time,
or the picture performance will be
unacceptable.
Video-3 (Side panel)
Camcorder
#01E08-17_2632HL84 2/26/04, 6:09 PM14