Toshiba 26HL84, 32HL84 Flat Panel Television User Manual


 
16
(E) 26HL84/32HL84
Connecting
your TV
Connecting a device to the TheaterLink
The TheaterLink allows you to remotely operate (through the TV)
most infrared-controlled devices* (such as a Toshiba infrared-
controlled VCR or DVD player) enclosed within an entertainment
center or similar cabinet. Without the TheaterLink, the device
typically would need to be visible to operate it remotely.
You can use the TV’s remote control (programmed to operate
the device; see pages 18–24) or the device’s remote control. Point
the remote control at the front of the TV and press the button for the
desired function. The signal passes from the remote control through
the TV to the device via the TheaterLink cable (included with your
TV).
To connect, align the TheaterLink cable’s infrared “eye” with the
device’s infrared sensor and attach it using double-sided mounting
tape (included with the cable in the accessory pack). Plug the other
end of the TheaterLink cable into the TV’s TheaterLink OUT
terminal.
You will need:
one TheaterLink cable (included)
one piece of double-sided mounting tape (included)
POWER
TheaterLink
cable’s infrared
“eye” facing
device’s infrared
sensor
Front of infrared-controlled device*
(such as a Toshiba infrared-controlled
VCR or DVD player)
With this connection, point the Toshiba
TV remote control at the front of the TV
to operate both the TV and the infrared-
controlled device. (You also can point
the devices remote control at the TV to
operate the device, but you also will
need to use the TVs remote control to
operate the TV.)
TV
___________
*The TheaterLink OUT function has been verified for use with Toshiba infrared-controlled devices. The TheaterLink IN
function has been verified for use with
SmarTouch™ STS/STS-C wireless RF control systems. Due to
the wide variation in remote control operation among manufacturers, these functions may or may not operate with other
brands.
SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com).
IR receiver/repeater
or home theater
control system
POWER
With this connection, point the Toshiba TV
remote control at the front of the
IR receiver/repeater or home theater
control system to operate the TV.
For additional control options for your
home theater system, you can connect
an IR receiver/repeater (not included) or
a home theater control system (not
included) to the TV s TheaterLink IN
terminal.*
See the Specifications section in the
back of this manual for TheaterLink IN
terminal requirements.
Contact your home theater electronics
dealer for details about home theater
control systems.
IN
OUT
IN
OUT
TV
Back of IR receiver/
repeater or home
theater control system*
(not included)
#01E08-17_2632HL84 2/26/04, 6:10 PM16