Filter
Top Products
7
Welcome to
Toshiba
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Connecting
your TV
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a regular video cable.
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time. Doing so will cause unacceptable
picture performance.
When recording, set Audio Out to
FIXED (see “Selecting variable audio
OUT” on page 33). With Audio Out set
to FIXED, the TV’s volume setting will
not affect the sound level being
recorded.
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable (see “Note Regarding Picture Quality,” above)
IN
VIDEO 1VIDEO 2
S-VIDEO
VIDEO
L/MONO
R
AUDIO
OUT
VIDEO
L/MONO
R
AUDIO
DVD IN
COLOR
STREAM
INPUT
L
R
AUDIO
Y
Pb
Pr
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
TV
From Cable or Antenna
ANT (75Ω)
ANT-1
Connecting your TV
Note: Cables are not supplied with your TV.
Coaxial cable is the cable that comes in from your antenna, cable TV service,
or cable converter box. Coaxial cable uses “F” connectors.
Standard A/V (audio/video) cables usually come in sets of three, and are
typically color-coded according to use: yellow for video, red for stereo right audio,
and white for stereo left (or mono) audio. On your TV’s back panel, the standard
A/V inputs are color-coded in the same manner as the cables.
S-Video cable is for use with video equipment that has an S-Video input.
Component video cables come in sets of three, and are for use with video
equipment that has component video inputs. (ColorStream
®
is Toshiba’s brand
of component video.)
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality: Use a standard yellow video cable.
For BETTER picture quality: If your equipment has an S-video input, use an
S-video cable
instead of a standard yellow video cable. (You still must
connect the standard red and white audio cables for full system connection,
but
do not connect the standard yellow video cable at the same time, or the
picture performance will be unacceptable.)
For BEST picture quality: If your equipment has component video inputs,
use component video cables
instead of a standard video or S-video cable.
(You still must connect the standard red and white audio cables for full system
connection, but
do not connect the standard yellow video cable or an S-Video
cable at the same time.)
Component video cables
Coaxial (antenna) cable
Standard A/V cables (red/white/yellow)
S-video cable
CAUTION: Do not plug in any power cords
until you have finished connecting all equipment.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.