Filter
Top Products
30
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will count down 10 minutes for
each press of the SLEEP button (120, 110, ...10, 0). After the sleep
time is programmed, the display will appear briefly every ten minutes
to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0.
Using the closed caption feature
The Closed Caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
• Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your viewing
area).
To view captions or text:
1. Tune the TV to the desired program.
2. Press MENU, and then press
or to display the SETUP menu.
3. Press ▲ or ▼ to highlight CLOSED CAPTION.
4. Press
or to select the desired Closed Caption mode, as
follows:
• To view captions, select C1 or C2 (C1 displays translation of the
primary language in your area). Note: If the program or video
you selected is not closed-captioned, no captions will display
on-screen.
• To view text, select T1 or T2. Note: If text is not available in your
viewing area, a black rectangle may appear on-screen. If this
happens, set the Closed Caption feature to OFF.
• To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
Note:
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
PICTURE AUDIO SETUP
CH
OPTIONMODE
CH PROGRAM
ADD / ERASE
START
ADD
SELECT ADJUST
TV / CABLE CABLE
CLOSED CAPTION
C1 C2 T1 T2
OFF
Menu/
Enter
Sleep
Using the TV’s
Features
3N10201A/E P18-30 09/04/2003, 12:5630