Toshiba 32 80cm CRT Television User Manual


 
Base colour adjustment
Hue Saturation Brightness
Red +2 +6 +4
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset
OK
MENU
Back
EXIT
Watch TV
PICTURE
Picture settings
OK
3D Colour management
On
Base colour adjustment
OK
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
23
Picture controls continued
Press
f
and
e
to select an option, then
x
to
adjust the settings.
2
In the PICTURE menu press
e
to select
Base colour adjustment, then press OK.
1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
When 3D Colour management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour management
In the PICTURE menu press
e
to select 3D Colour
management.
Press
z
or
x
to select On or Off.
1
2
To return to the original factory settings select
Reset and press OK.
PICTURE
Picture settings
OK
3D Colour management
On
Base colour adjustment
OK
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
In the Picture settings menu press
e
until
Colour Temperature is highlighted.
Press
z
or
x
to select between Normal, Warm
and Cool to suit your preference.
1
2
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
Colour temperature
Picture settings
Black stretch On
MPEG NR Low
DNR Auto.
Colour Temperature Cool
MENU
Back
EXIT
Watch TV
2/2
C3000D Eng OM 28/1/07 6:01 pm Page 23