Filter
Top Products
31
Connecting Your TV
Connecting a digital audio system
3 Press the ( / arrow) buttons to highlight Audio Setup, and
then press the ENTER button.
(Sample Image) Audio Setup screen
4 Press the ( / arrow) buttons to select Optical Output
Format.
5 Press the ( / arrow) buttons to select either Dolby Digital or
PCM, depending on your device, see “Selecting the optical
audio output format” on page 79.
(Sample Image) Digital Output Format screen
6 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
❖ Some audio systems may not be compatible with Dolby Digital
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
❖ The DIGITAL AUDIO OUT terminal may not output some digital
audio sources because of copy restrictions.
NOTE