Filter
Top Products
21
HL67 (E/F) Web 213:276
Chapter 3: Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- page 23).
Note: The error message “Not Available” may appear if you
press a key for a function that is not available.
1 POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
2 PIC MODE selects the picture mode (- page 42).
3 SLEEP accesses the sleep timer (
- page 52).
4 PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, and Native (
-
page 39).
5 Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
(
- page 38) or to edit the Favorites List (- page 36).
6 INPUT selects the video input source (
- page 35).
7 CH Bb cycles through programmed channels when no
menu is on-screen (
- page 30).
8 VOL + – adjusts the volume level.
9 FAV BROWSER accesses the Favorites List in the
Channel Brower
™
(- page 36).
10 RECALL displays TV status information (- page 53).
11 CH RTN returns to the last viewed channel or source
(- page 38).
12 MUTE reduces or turns off the sound (- page 44).
13 INFO displays TV status information as well as program
details, when available (- page 53).
14 3C / #c While watching TV, these buttons open the
Channel Browser
™
and tune to the previous/next channel
in the channel history (- page 37). (Also see “Arrow
buttons.”)
15 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3C/ #c.)
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system (
- pages 27
and 28).
18 EXIT closes on-screen menus.
19 MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes (
- page 22).
Set to “TV” to control the TV.
26HL67_EN.book Page 21 Tuesday, April 17, 2007 11:52 AM