Filter
Top Products
34
HL67 (E/F) Web 213:276
Chapter 5: Setting up your TV
6 Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
To cancel the reset:
Highlight No and press T.
Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
• Power-Saving mode keeps power consumption in standby
mode to below 3W. As a result, it takes a bit longer to turn
on.
• Fast mode increases power consumption in standby mode.
As a result, the TV will turn on quicker. While in Fast
mode, the yellow LED on the TV front will be lit.
To set the Power-On Mode feature:
1 Press Y, and open the Setup menu.
2 Highlight Power-On Mode and press c.
3 Press B or b to select either Power-Saving or Fast.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
YesNo
Installation
Sleep Timer
PC Settings
Power-Saving
Fast
Setup
Power-On Mode Power-Saving
26HL67_EN.book Page 34 Tuesday, April 17, 2007 11:52 AM