Toshiba 36A10 Flat Panel Television User Manual


 
17
Set up
Preparation
Basic Operation
Advanced Operation
Reference Section
ADD/ERASE function
After performing the CH PROGRAM function, you can add or erase specific
channels.
1 Select the channel you want to erase using the CHANNEL or
button, or select the channel you want to add using the Channel
Number buttons.
4 Press T or S :
To erase the channel
Press the button until ERASE is displayed
in purple indicating that the channel has
been erased from the memory.
Number on
this TV
Correspond-
ing CABLE
channel
Number on
this TV
Correspond-
ing CABLE
channel
The above chart is typical of many cable
system channel allocations. If in doubt,
consult your cable company.
1 A-8 67 67
5 5(A-7) 68 68
6 6(A-6) 69 69
14 A
15 B 92 92
16 C 93 93
94 94
34 U 95 A-5
35 V 96 A-4
36 W 97 A-3
37 AA 98 A-2
38 BB 99 A-1
100 100
60 XX 101 101
61 YY 102 102
62 ZZ
63 AAA 123 123
64 BBB 124 124
65 65 125 125
66 66
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
2 Press MENU repeatedly until the Setup
menu is displayed on the screen.
3 Press s or t repeatedly until ADD/
ERASE is displayed in purple.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[
t s
] SELECT[
T
S
]
To add the channel
Press the button until ADD is displayed in
purple indicating that the channel has been
memorized.
CABLE channel reference chart
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
ADD[ERASE]
FAVORITE CH
MOVE[
t s
] SELECT[
T
S
]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[
t s
] SELECT[
T
S
]
Preparation