Toshiba 40E200U Flat Panel Television User Manual


 
Chapter 6: Using the TV’s features
49
3無
Press p or q to select the item you want to
control and press .
Item Description
Power Turns the select device on and off.
Root
Menu
Accesses the top menu of the selected
device.
Contents
Menu
Accesses the contents list when you press
. At this time, the REGZA-LINK Player
Control menu will disappear.
Setup
Menu
Accesses the setup menu of a DVD
player.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Note:
•
These functions depend on the devices that are
connected.
•
The REGZA-LINK Player Control item will be
grayed out in the following conditions:
A non-HDMI input is currently selected.
The Enable REGZA-LINK item is set to Off.
The connected CEC device is not a
playback or recording device.
REGZA-LINK
®
input source selection
If a REGZA-LINK device with HDMI switching
capability (e.g. Audio Receiver) is connected to
the HDMI input, you can select another REGZA-
LINK device that is connected to the master HDMI
device using the TV’s INPUT button. See page 29 for
details.
VOLUME and MUTE controls of Audio
Receiver
With your TV’s remote control, you can adjust or
mute the sound volume of the Audio Receiver.
• adjust the volume level.
• turns off the sound.
Note:
To use this function:
Set Speaker Preference to Audio Receiver in
the REGZA-LINK Setup menu.
Confirm that a connected REGZA-LINK device
(such as DVD player, etc) is selected for the
Audio Receiver input source.
You can also use this function when the audio
receiver is connected to the TV’s DIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receiver.
These functions depend on the device
connected.
Other REGZA-LINK
®
functions
When the Enable REGZA-LINK and each item in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
Item Description
TV Auto
Input Switch
If a connected HDMI device starts
playing video or audio, the TV will
automatically switch to the appropriate
HDMI input.
TV Auto
Power
If a REGZA-LINK device is turned on,
the TV turns on automatically.
Device Auto
Standby
If the TV is turned off the TV will send
a message to turn off all of the REGZA-
LINK devices connected to the TV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver,
the TV remote can be used to adjust
or mute the volume of the audio.
This item will be grayed out unless
a REGZA-LINK compatible audio
receiver is connected.
Note: When you turn on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TV speakers.
To set the REGZA-LINK
®
Setup:
1無
From the Setup menu, highlight REGZA-LINK
Setup and press .
2無
Press p or q to highlight Enable REGZA-LINK.
3無
Press t or u to select On.
(continued)