Toshiba 42/51WH46 Flat Panel Television User Manual


 
18
Teletext – setting up,
general information, Auto. and LIST modes
This television has a multi-page teletext memory, which takes a few moments to load. It offers two Modes of
viewing text – Auto will display Fastext, if available. LIST will store your four favourite pages.
Select Teletext from the FEATURE menu.
With
S
or
R
choose Auto. or LIST then press EXIT.
The teletext character set will be automatically chosen by
the language setting in the SET UP menu.
Selecting Modes
1
2
▼▼▼
Teletext Auto.
Panel lock Off
Auto format On
Blue screen On
FEATURE
EXIT :To exit
If Fastext is available four coloured titles will appear at
the base of the screen.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast teletext index page or, consult your
local Toshiba dealer.
To access the sub-pages press
X
(
B
). The page number
will be replaced by pink sub-page numbers, use
S
and
R
to view them. Any additional sub-pages will load
automatically. To alter the page selection the sub-pages
must be switched off by pressing
X
(
B
).
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.
The
6
/
7
button:
To view teletext press
6
/
7
. Press again to superimpose
the teletext over a normal broadcast picture and again to
return to normal viewing. Programmes cannot be
changed until teletext is cancelled.
The first text page shown will be the initial page.
In Auto. mode this displays the main subjects available
and their relevant page numbers.
In LIST mode this displays whichever page number is
currently stored on the RED button.
In either mode any teletext page can be accessed by
entering the 3 digit page number using the numbered
buttons, pressing the coloured buttons or pressing
P
f
(P) to advance to the next page and P
e
(Q) to
go back to the previous page.
Sub-pages
If there are sub-pages they will automatically load into
memory without changing the page on screen. When all
available sub-pages have loaded the page number in the
top left hand corner will change from white to yellow.
Navigating pages using Auto.
Teletext information
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the TV’s memory. To view these pages
press the relevant coloured buttons.
To change these stored pages press the relevant coloured
button and enter the 3 digit number. This number will
change in the top left of the screen and in the coloured
highlight.
Press OK to store. The bars at the bottom of the screen
will flash white. Whenever OK is pressed all four
page numbers showing at the bottom will be stored
and the previous ones will be lost.
If OK is not pressed the selection will be forgotten when
teletext is cancelled.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press OK or these pages will be
stored.
Navigating pages using LIST