PAGE 39
Auto Adjustment
CHANNEL
PICTURE
AUDIO
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Prev.
Menu
Auto config.
Manual config G
Aspect ratio
Cinema
NR
Reset
- If the image still isn’t clear after auto adjustment and especially if characters are still jittery,
adjust the picture Phase manually.
- H position or V position function only work for RGB-DTV/HDMI-DTV/HDMI-PC mode.
- To correct the screen size, adjust H Size, V Size, H Position, V Position.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Manual config..
3. Press the
G button and then use
D / E
button to to select Phase.
4. Use the
F / G button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 63.
5. Press the ENTER button to save.
Phase 0
H Size 0
V Size 0
H Position 0
V Position 0
- RGB (PC) mode only; This function doesn’t work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV is functioning properly but
needs further adjustment.
-The Auto config. is not active in HDMI mode.
1. Press the MENU button and then use
D /E
button to select the SCREEN menu.
2. Press the G button and then use
D /E
button to select Auto config..
3. Press the G button to run Auto configure.
• When Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using Auto config.,
you can make further adjustments with the Manual config. option.
CHANNEL
PICTURE
AUDIO
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Prev.
Menu
To set
Auto config. G
Manual config
Aspect ratio
Cinema
NR
Reset
