Toshiba 50HM67 Projection Television User Manual


 
39
HM67 (E/F) Web 213:276
Chapter 6: Using the TV’s features
4 Press b to highlight History List, and then press C or c
to select the setting you prefer: either Power Off Clear
(On), On, or Off.
Note: When History List is set to On and the Power-On
Mode (- page 35) is in Fast mode, the channels and
inputs stored in the list will be saved every power on/off
cycle. When History List is set to Power Off Clear (On),
the channels and inputs stored in the list will be cleared
with every power on/off cycle of the TV.
5 Press b to highlight ANT List, and then press C or c to
select On or Off.
6 Press b to highlight Inputs List, and then press C or c
to select On or Off.
7 Press b to highlight Favorites List, then press C or c to
select On or Off.
8 To save your entries, highlight Done and press T.
To return to factory defaults, highlight Reset and
press T.
To open the Channel Browser
:
Press 3 C or # c on the remote control.
Press 3 C to surf backward through the previously tuned 32
channels in the History list, the channels in the ANT channel
list, the inputs in the Inputs list, or the favorite channels/
inputs in Favorites list.
Press # c to surf forward through the channel History, the
ANT channel list, the Inputs list, or the favorite channels/
inputs in Favorites list.
Elements of the Channel Browser
1 Current list (History, ANT, Inputs, or Favorites)
2 Input type
3 Channel or input currently being viewed
4 Channel or input that is currently highlighted in the
browser
5 Channels stored in the History List
6 Channel labels
To toggle among the available lists:
After opening the Channel Browser
, press B or b to toggle
among History, ANT, Inputs, and Favorites.
Note:
The Channel Browser
opens in History List by default.
Once another list has been selected, the Channel Browser
will open in the last selected list.
If all lists are turned off, pressing
3 C, # c, or n will
not display the Channel Browser
. If Favorites List is
turned off, n will have no effect.
Pressing n will bring up the Channel Browser
Favorites list regardless of the last selected list in the
Channel Browser
.
To tune to a channel or input in Browse mode:
1 While watching TV, press 3 C or # c to open the
Channel Browser
and surf back to a previous item or
surf forward to the next item in the list.
In Browse mode, when you stop on an item in the
Channel Browser
, it will be highlighted and the TV will
automatically tune to the channel or input.
2 Press O to close the Channel Browser
.
To tune to a channel or input in Select mode:
1 While watching TV, press 3 C or # c to open the
Channel Browser
and surf back to a previous item or
forward to the next item in the list.
In Select mode, when you stop on an item in the Channel
Browser
, it will be highlighted but you must press T to
tune the TV to the highlighted item.
2 Press T to tune the TV to the highlighted item.
3 Press O to close the Channel Browser
.
Adding and clearing channels and inputs in the
History List
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser
adds it
to the History List and displays it on the “right side” of the
Channel Browser
. Previously tuned channels/inputs are
“shifted” to the left, eventually moving off the left side. Press
3 C to surf backward through the previously tuned channels/
inputs. Any channel or input that is tuned repeatedly will not
be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser
.
The Channel Browser
will store the following channels:
All channels that are tuned using the numeric buttons on the
remote control.
All channels that are tuned using < or , on the remote
control.
Note: Whenever an item is selected that cannot be tuned (for
various reasons), the TV will automatically tune to the
previously viewed channel or input.
88
History
10 32 11 8
TVLAND ABCHD WEATHER
5
1 2 43
6
(continued)
09C06.fm Page 39 Thursday, March 29, 2007 4:21 PM