Toshiba 50L1350U Flat Panel Television User Manual


 
55
Setting up your TV
Setting the AV input mode
The list of channels appears.
(Sample Illustration) Channel Options
2
Press the
/ (arrow)
buttons to select a channel position to be
skipped, and then press the ENTER button .
A check will appear in the box. To remove the check, press the
ENTER button again.
To add a channel to the channel memory:
v Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
You can also block specific channels so that they cannot be tuned
until you unlock them. For information, see “Locking channels” on
page 87.
To manually add digital sub-channels on a physical channel:
v Use the Channel Numbers and the (Dash 100) on the remote
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
Skipped channels cannot be selected with the CH / (arrow)
buttons; however, they can be accessed using the number keys on the
remote control.
Setting the AV input mode
This setting determines the conguration of the shared AV input on
your TV. You can set this input for either ColorStream HD or Video.
Add the following descriptions:
To set the AV Input mode: