Filter
Top Products
86
Setting up your TV
Using the input lock feature
Unlocking programs temporarily
If you try to tune to a program that exceeds the rating limits you
have set, the TV will enter program lock mode and a warning
message appears on the screen.
This program exceeds the rating limit you set.
Push " MUTE " to enter PIN.
(Sample Illustration) Warning - exceeded rating limit
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1 Press the MUTE button.
2 Enter your four-digit PIN code, and then press the ENTER
button.
If the correct code is entered, the program lock mode is released
and the normal picture appears. All locking will be enabled
again when you change the channel.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs (Video,
ColorStream
®
HD, HDMI 1, HDMI 2, HDMI 3, and PC) and
channels 3 and 4. You will not be able to view the input sources or
channels until you unlock the inputs.
To lock/unlock the video inputs:
1 In the Options menu, highlight the Parental Control and
Locks, and then press the ENTER button.
2 Enter your four-digit PIN code.
3 Highlight Input Lock, and then press the ENTER button.
4 Press the ▲/▼(arrow) buttons to select the level of video input
locking you prefer (see table below for descriptions), and then
press the ENTER button.
Mode: Description:
Video Locks Video, ColorStream
®
HD, HDMI 1, HDMI 2, HDMI 3, and PC.
Video+ Locks Video, ColorStream
®
HD, HDMI 1, HDMI 2, HDMI 3, PC and
channels 3 and 4. Select Video+ if you play video tapes via an ANT/CABLE
input.
Off Unlocks all video inputs and channels 3 and 4.