Filter
Top Products
7
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
at, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2)
Remove the stand screws shown in the diagram
below.This will allow removal of the pedestal stand.
3)
Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
Two stand screws
VESA Mounting Pattern
Two stand screws
VESA Mounting Pattern
Four stand screws
VESA Mounting Pattern
CAUTION: Always place the TV on the oor or a
sturdy, level, stable surface that can support the weight
of the unit. To secure the TV, use a sturdy strap from
the hook(s) on the rear of the TV to a wall stud, pillar, or
other immovable structure. Make sure the strap is
tight, secure, and parallel to the oor.
NOTE: The 23L1350U and 23L2300U do not include a
hook on the back of the TV.
23” TV.
29” TV.
Two stand screws
VESA Mounting Pattern
32” TV.
Two stand screws
VESA Mounting Pattern
39” TV.
Four stand screws
VESA Mounting Pattern
50” TV.
Hook Sturdy strap
(as short as possible)
Hook Sturdy strap
(as short as possible)
Hook Sturdy strap
(as short as possible)
Hook Sturdy strap
(as short as possible)
Hook Sturdy strap
(as short as possible)
58” TV.