Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
22
Learning about the remote control
Only the buttons used to operate the TV are described here.
POWER turns the TV on and off
SLEEP programs the TV to turn off at a specific time (page 44)
LIGHT Pressing the LIGHT button toggles the illumination mode on
and off. With the illumiantion mode on, the keypad will light up for
5 seconds when any key is pressed. (If in programming mode, the
keypad will remain lit for 10 seconds).
Channel Numbers (0–9, 100) allow direct access to channels, even those
not programmed into the TV’s memory (page 26)
MODE cycles through the six device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2). The mode indicator light will
remain lit for 10 seconds.
FAVORITE accesses the multi-window favorite channel scan function
(page 33)
INFO accesses the multi-window channel preview function (page 33)
MENU/ENTER accesses the on-screen menu system and sets menu
information (page 23)
yz x • Buttons select or adjust menu items when a menu is on-screen
(page 23)
x • Buttons cycle through only the channels you program as favorite
channels. These buttons function as favorite channel buttons
(FAV
x•) only when no menu is on-screen. (page 28)
VOL yz adjusts the volume level
EXIT closes any open on-screen menu (page 23)
CH yz cycles through only the channels you program into the TV’s
memory) (page 26)
CH RTN returns to the last viewed channel (page 28)
RECALL displays TV status information on-screen (page 50)
MUTE dims (1/2 mutes) or turns off (mutes) the sound (page 45)
INPUT selects the video input source (page 42)
PIP Buttons access PIP functions (page 31)
PIP turns the PIP feature on and off
PIP CH yz changes the PIP channel
MULTI accesses the multi-window strobe function
STILL freezes the PIP picture
SOURCE selects the PIP source
LOCATE moves the PIP window
SWAP swaps the main and PIP pictures
CT-90047