Filter
Top Products
7
INTRODUCTION
Identifi cation of Controls
Front panel
Rear panel
1. AC power cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely turn
off the unit.
2. COAXIAL DIGITAL AUDIO OUT jack
• Use to connect an AV receiver / amplifi er, Dolby Digital /
DTS decoder or other device with a coaxial digital audio
input jack using a coaxial digital audio cable.
3. VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device with
a composite video cable.
4. ANALOG AUDIO OUT(L/R) jacks
• Use to connect a TV, an AV receiver / amplifi er or other
device with a composite audio cable.
5. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port via
an HDMI cable.
6. USB jack
• Use to connect USB fl ash drives/wireless LAN adapter
(not included).
7. LAN terminal
• Use to connect a network equipment with LAN cable.
1 2 3 4 5 6 7 8
LANUSBHDMI OUTANALOGCOAXIAL DIGITAL
1 3 5 6 742
1. Disc tray
2. Display
3. Remote sensor
4. OPEN/CLOSE
button
5. STOP
button
6. PLAY
button
7. POWER button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you must
unplug the AC power cord.)
8. SD/SDHC card slot