Filter
Top Products
13
CONNECTIONS
Wired Network Connection
LANUSBHDMI OUTANALOGCOAXIAL DIGITAL
LAN
WAN LAN
12345
LAN
Internet
LAN cable
LAN cable
Hub or broadband router
Networking equipment
(modem, etc.)
Your Blu-ray Disc™ player can be connected to your home network:
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using •
a wired network provides the best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting your player to a wired router
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the • ETHERNET jack on the back of your player
and to an Ethernet jack on a hub or broadband router.
Notes:
Do not connect a modular phone cable to the • ETHERNET jack.
When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull •
on the cable. Press down the lock tab and pull the connector out of the jack.
Because there are various connection confi gurations, follow the instructions from your telecommunication carrier or •
Internet service provider.