Filter
Top Products
18
Blu-ray Disc™/DVD player connections
5.375 x 8.375 ver 3.1
(Sample Illustration) Connecting to a wireless router
Connecting your player to a wireless access point or router - for BDX5300KU model
Your Blu-ray Disc™/DVD player has an integrated Wi-Fi
®
device and antenna. No physical
connection to the wireless router is necessary.
1 Configure your player to access the wireless access point or router.
2 The network configuration and connection method may vary depending on the equipment in
use and the network environment. Your Blu-ray Disc™/DVD player is equipped with an
IEEE 802.11n wireless module, which also supports the 802.11 a/b/g/n standards. For the best
wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi
®
network
(access point or wireless router).
(Sample Illustration) Connecting to a wireless router
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for
stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP
performance, distance, obstacle, interference by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is
supported.
1. Authentication Mode: WPAPSK, WPA2PSK
2. Encryption Type: WEP, TKIP, AES