Filter
Top Products
76
PTZ Address Settings
Some protocols support software address settings.
The RX Addresses and ID settings are compatible with a particular
line of receivers that support 2 ID addresses
The PT Driver Address is associated with the PTZ ID address set on
the camera. The addresses must match for the DVR to communicate
with the proper PTZ camera. This is especially important when a large
number of PTZ cameras are connected to the DVR.
NOTE: To select a PT Driver Address of 129-254, manually enter the
ID in the box.
ACCESSING PTZ MENUS
Some protocols support the ability to access the
Internal PTZ Onscreen Menu
Since every PTZ camera is different, the functions of
these options can vary slightly.
The Surveillix DVR provides an easy way to access
the cameras options. For explanations of what those
options are please refer to the manual that came with
the camera
NOTE: Use the arrow buttons on the PTZ controller
move through the PTZ Menu options and/or highlight
options.
Open PTZ Camera Menu
Arrow buttons
Select Item on Menu
Close PTZ Camera Menu